Netgear WN3500RP Setup | Netgear N600 Setup

Netgear N600 WN3500RP extender – Just plugand play. Netgear WN3500RP Setup is a simple way to extend your WiFi and stream your favorite tunes at any places. Connect your speaker to the audio jack on the Netgear WN3500RP extender and stream songs using Airplay or DLNA. Whether you use it as a wall-plug or any other method, it’s easy to find the right place for your Netgear WN3500RP N600 extender.

Netgear WN3500RP Setup | Netgear N600 Extender

Troubleshooting Steps

Follow the below-mentioned troubleshooting steps to fix Netgear WN3500RP setup issues-

  • Ensure that the Netgear WN3500RP range extender is receiving proper power supply from an electric power outlet.
  • Make sure that the electric wall outlet is not damaged or short-circuited.
  • You must have a high-speed internet connection.
  • Check all the wired connection. Make sure there is no damaged cable.
  • Place your Netgear WiFi range extender away from microwave ovens, cordless phones, Bluetooth devices, room corners, etc.
  • Use the latest and updated web browser during mywifiext extender setup.
  • Keep your Netgear firmware device up to date.
  • Reset your Netgear WiFi range extender to its factory default settings.

If none of the above-mentioned troubleshooting tips fix your Netgear WN3500RP setup issues, do not panic. Just contact us and fix your Netgear extender setup issues.

Netgear WN3500RP Firmware

Update Firmware after Netgear WN3500RP Setup

Does your WiFi range extender stop working or behave weird? Are you still facing the speed issue even after a successful Netgear WN3500RPsetup? If yes, then update your Netgear WN3500RP firmware right now. Netgear extender firmware is a set of instructions used to control the hardware of the extender.

  • Firstly turn on your WiFi range extender.
  • Connect your extender to the router.
  • Once done, open any of your preferred web browsers.
  • Enter Netgear in the address bar and hit the Enter key.
  • Fill the Netgear extender login credentials.
  • Go to settings and then click on the Firmware Upgrade option.
  • If any firmware version is available, click on Yes button.
  • Wait for some time and let your Netgear extender firmware update properly.
netgear firmware

That’s it! Your Netgear WN3500RP extender firmware has been updated.

Netgear WN3500RP Setup | Netgear N600 Setup

Using Netgear Installation Assistant
  • Plug-in your extender into an electric power outlet to begin with Netgear WN3500RP setup.
  • Place your WiFi range extender close to your existing WiFi router.
  • If the extender does not light up, press the power button.
  • Connect your Netgear WN3500RP extender to the router with the help of an Ethernet cable.
  • Launch a web browser from your computer and visit If fails to visit, get in touch with our professionals.
  • The Netgear installation assistant will pop on the desktop’s screen.
  • Follow the on-screen instructions to set up your Netgear extender.
  • Once configured, move your Netgear WN3500RP Netgear extender to a new location.
  • If you get no or poor network connection, move your Netgear WN3500RP extender closer to your existing WiFi router and try to connect it again.
  • Once you find the best location, try to connect your client devices to the extended WiFi network.

Netgear WN3500RP Manual Setup

The time you have purchased a brand new Netgear WN3500RP extender, you will get an installation manual guide in the box. The Netgear WN3500RP manual contains a series of setup guidelines from beginning to end. All you need to do is simply walk through Netgear WN3500RP manual setup steps to make your extender running within minutes.

However, understanding these Netgear WN3500RP manual setup instructions are quite difficult for non-tech users. Therefore, the best way to install Netgear WN3500RP WiFi extender is to contact our experts. They will assist you with every complex step in an easy manner.

netgear WN3500RP

How to Setup Netgear WN3500RP with the NighthawkApp?

Users can also use the Netgear app for Netgear WN3500RP setup and connect to the internet. This app is available for both major platforms, i.e. Android and iOS.

Follow these steps to perform Netgear N600 setup using the Netgear app:

  • First of all, ensure that your router is connected to the internet.
  • Note down the router’s SSID or network name and password.
  • Now, turn on your Netgear extender.
  • Download Netgear app on your Android or iOS device.
  • After that, open the Netgear app on your smartphone.
  • Follow the on-screen installation steps to set up your Netgear WiFi range extender and connect to the internet.

Still can’t setup your Netgear WiFi extender? Don’t worry! Contact our knowledgeable and skilled technicians and set up your extender from the comfort of your home.

Netgear WN3500RP Setup | Netgear AC750 Setup

Using WPS Push Button

Steps for Netgear WN3500RP setup using WPS are:

  • Power on the Netgear WN3500RP WiFi Range extender.
  • Place your Netgear WiFi range extender and WiFi router in the same room.
  • Once done, plug-in your Netgear extender into an electric power outlet.
  • Press the WPS button present on the backside of the range extender.
  • Wait for a few minutes, let the connection between your range extender and router be good.
netgear WN3500RP

Note: If your existing WiFi router supports the 5GHz bandwidth, your Netgear WN3500RP extender might attempt to connect to your WiFi router’s 5 GHz bandwidth, very first time you press the WPS button. If your Netgear N600 setup does not work with your existing WiFi router in the very first time, it might result in many issues during Netgear WiFi extender WN3500RP setup.

  • Place your Netgear WN3500RP N600 extender to a new location but make sure that your range extender is within the network coverage zone of your WiFi router.
  • Try to connect your laptop or smartphone with the extended WiFi network.

That’s how you can complete your Netgear N600 setup using WPS button.

Netgear WN3500RP Extender Setup | Netgear N600 Setup

Configure FastLane Technology

FastLane Technology offers you maximum WiFi performance. Basically, it provides high-speed network connection with a dedicated bandwidth connecting the router to Netgear WN3500RP extender and the second bandwidth connect WiFi device and extender. Follow the below-mentioned steps to configure your Netgear WN3500RP Extender setup with FastLane Technology-

  • For Netgear WN3500RP setup, connect your router to the range extender via Ethernet cable.
  • Ensure that you have a well Internet connection.
  • Open any of your preferred web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, or Safari (MAC or iOS).
  • Visit the Netgear extender setup page and enter the default Netgear extender login credentials. Hit the ‘Enter’ key or click on the Login button.
  • On Netgear WN3500RP setup, click on the ‘Do More’ option and then choose ‘FastLane’ option.
  • Now choose one from two options, i.e. ‘Extender-to-router in 5GHz only and Device-to-extender in 2.4GHz only’ or ‘Extender-to-router in 2.4GHz only and Device-to-extender in 5GHz only’.
  • Once selected, click on the Save button.

Copyright © 2020 All Rights Reserved