netgear extender

5 Easy Steps to Fix Netgear Extender Orange Light Error

Stuck with Netgear extender orange light error? Not anymore! You have arrived at the right post. Here, we will guide you on how to fix blinking power orange light on Netgear extender. Allow us to help you get past this error. Read on.

What does the Orange Light Mean on Netgear Extender?

When you turn on the Netgear extender, the power LED lights up amber and then turns into solid white or green. But in case the power LED stays orange or amber, then your extender has an issue.

The solid orange power light on the extender means that the device is booting up and it might have stuck while booting.

Let’s have a look at some main reasons behind the blinking orange light on your Netgear extender:

  • Power outage
  • The extender is not set up properly
  • Improper placement of the extender
  • Outdated firmware version

Here are a few things that you can do to resolve the Netgear extender orange light error with ease. Scroll down to read more.

Fix: Netgear Extender Orange Light

Essential Tip: Be sure that you have completed new extender setup properly.

Step-1: Power-Cycle Your Extender

The most basic way to fix Netgear WiFi extender orange light is to power-cycle your extender. This can be done by following the steps below:

  • Unplug the power cord from your extender.
  • Wait for a while.
  • After that, plug the power cord back to your extender.

Now, see the power LED light on your Netgear extender and check if it is solid green or amber/orange.

Step-2: Verify the Cable Connections

In the event that the Netgear range extender orange light blinking error is still there, check all the cable connections you have made during or after the installation. Keep the following things into mind while checking the cable connections:

  • There should not be any loose cable connection.
  • The Ethernet cable you use should be non-damaged.
  • In case the cable has cuts or is damaged, use a new one instead of it.
Step-3: Check For Power Outage

Power outage is another reason behind the Netgear wireless extender power light orange error. In such a case, unplug your extender and plug it back again but after some time. You can also try changing the power outlet to plug in your Netgear extender.

On the off chance if you are still seeing the same error, you may need to reconfigure the settings of your extender.

Step-4: Update Netgear Extender Firmware

The next troubleshooting step in our list of easy fixes to get rid of the blinking power LED light on Netgear extender is to update its firmware. In case your Netgear extender has an obsolete firmware version, update it right now by walking through the steps outlined below:

  • First and foremost, plug in your Netgear range extender to an electrical outlet and turn it on.
  • Insert one end of the Ethernet cable into the extender whereas another to the home WiFi router.
  • Turn on your router too.
  • Open a web browser which you like the most.
  • Make a visit to the mywifiext login web page.
  • Fill in the required sign-in credentials and hit Log In.
  • Henceforth, go to the Firmware Update tab.
  • If there is any new firmware update available, go through the on-screen instructions.

That’s all! Thus, you can update your Netgear extender firmware. Thereafter, reboot your extender and check whether the blinking orange power LED becomes green or not.

Step-5: Reset Netgear Extender

Nothing has resolved your Netgear WiFi range extender orange light error? Relax! You are still in luck. Now, the Netgear extender reset is the only method you are left with.

Restore all the factory default settings of your Netgear wireless extender. Once done, your extender becomes as error-free as new. However, all the extender’s customized settings made by you will be deleted after reset. So, it is recommended to take a backup of all the existing settings of your Netgear extender so that you don’t need to reconfigure it from the scratch.

Netgear Extender Orange Light Error Got Fixed?

If not, worry not! Just get in touch with our experts anytime and get the blinking power LED light issue on your Netgear extender fixed in a flash.

Shawn Phobe, A professional blogger, Covers all latest and breaking news on Politics, Business, Sports, Bollywood, technology & health from round the globe.